Vesmach Main Welcome Events
   
 
Home   HOME > Products > Equipments & Machinerire > Blast Chilling & Freezing> Trolleys
 
BLAST CHILLING & FREEZING
TROLLEYS BLAST CHILLERS
 
 
 
Trolleys Blast Chiller
MODEL:
Trolleys Blast Chiller
Download PDF File
PURPOSE:
The machine is generally used for fast cooling of pre-processed products
Compact & standard range from 40 to 405 kg/cycle
This have a great refrigerating power. Single or double box, until 405 kg of products/cycle of 90 or 110 minutes, in 1 to 4 trolleys.
   
FEATURES
   
Trolley Blast Chiller Cell The Cell
• Evaporator(s) are painted and corrosion inhibitor
• Ultra Short cycle for consideration of conditioning time
• Heated electric door Leads
• Insulation (polyurethane) and Refrigerant (404 A) CFC
• Flow Fans and low temperature greasing
• Fans collar to optimize power and airflow
• Grid Stainless ventilation
• Amounts assembly body reinforced polyethylene (rot) grab rails and einforcements hinges over the entire height of the cell
Cleaning & Maintenance Cleaning & Maintenance
• Rounded inner corners
• Door seal lip, easy cleaning, disassembly without tools
• Refrigeration system suspended access 100% of floor area
• Defrost ultra short electric resistance forced march and fans (drying evaporators), automatic shutdown
• Pivoting ramp for ventilation and cleaning maintenance facilities
• Anti-moisture and high sealing wardrobe keypad and remote electrical panel
• Door hinged reinforced ramp clearance
System System
• Evaporation vertical tubes
• Vertical homogeneity of cooling
• Horizontal slats for an effect "air gap" on full height
• Evaporator(s) Remote(s) to limit losses charge of the ventilation
• Not suitable for fin delay taking frost
• Height evaporators adapted to the size of cell
Soil Soil: An indispensable element
CAUTION: Succession cycles (freeze-thaw) makes mandatory protection existing soil in the cell. A cell without causing soil degradation resins, the bursting of concrete and tiles.
• Standard floor consists of a series of sole 15 mm thick polyethylene covered a stainless steel 20/10 AISI 304 with edge sealing
• Mini Ramp compliance
   
   
   
   
   
   
   
   
Go Top